Praxismith– lessons donePraxismith– lessons doneStop losing evenings to customer paperwork. Get 8D replies, RFQ answers, vendor questionnaires, SOPs and deviation requests from the findings, readings and notes you already have.
Choose a workflow to see what it writes from your own findings, readings and notes.
This is an example. With the edition you fill in your own details and run it.
8D REPORT Customer: Apex Auto Components, Pune plant Part: Bracket, rear seat mounting, part no. BR-2214 D1. Team Suresh (QA), Mahesh (production), Anita (tool room). D2. Problem 12 brackets from lot L-0915 were rejected at your incoming inspection. The mounting hole position was outside the drawing limit. Quantity received: 1,500. D3. Containment All 1,288 pcs of lot L-0915 in our stock were held and 100% checked with a go/no-go gauge. 1,500 replacement pcs were sent on 19 Sep. D4. Root cause We found the piercing punch on press 4 worn, and the fixture locating pin loose. In 200 pcs checked from stock, 9 had the hole position 0.3 mm off. [CHECK: confirm which of the two caused the fault, and how you proved it] D5. Corrective action The piercing punch was replaced on 18 Sep. [CHECK: action on the loose locating pin] D6. Action taken and checked [CHECK: how you checked the fix worked, with results] D7. Stopping it from happening again [CHECK: for example, a punch change schedule or a daily fixture check] D8. Closure [CHECK: date and who signs off]
Each one uses only your findings, readings and notes. It never makes up a root cause, a measurement, a test result or a certificate.
Turns a customer complaint and your findings into an 8D reply, section by section. What you haven't found yet is marked for you to fill in.
Answers a request for quote from your own capability notes, and turns anything you haven't confirmed into a question.
Answers a new customer's registration questions from your company fact sheet, one answer per question.
Turns rough notes into a clear SOP with purpose, safety, numbered steps and checks, keeping every value you wrote.
Asks a customer to accept parts slightly outside a limit, with your readings summed up in code: limits, lowest, highest and how many are outside.
Pay once. No subscription. You get the five manufacturing workflows to use with your own details, and the Working With AI course.
Five manufacturing workflows you can use with your own details. You also get the Working With AI course.
After you pay: a sign-in link lands in that inbox and the first paid lesson opens. Usually under a minute.
No. You need email and an AI tool like ChatGPT or Claude.
No. It writes each section only from the complaint and your findings. If you haven't found the root cause yet, or haven't checked the fix, it marks that section [CHECK] for you to fill in.
No. It only mentions a certificate or standard if your fact sheet or notes give it, and it never says a part will work or is safe. Your customer decides that.
No. The limits, the lowest and highest readings, how many parts are outside and by how much are worked out before the AI sees them. It copies them as they are.
Yes. You get all five manufacturing workflows and lifetime access to the whole Working With AI course.
More in the full FAQ.
If your company, brokerage, or team wants custom prompt templates built for your specific documents, or guided hands-on implementation with zero public stage pressure, we offer dedicated private advisory sessions.